CD-ROM installation system steps to enter BIOS settings to start up - insert CD-ROM - press DEL (desktop) or F2 key (most notebooks) or its It keys to enter the BIOS-set the computer to start from the CD-ROM-F10-Y-Enter, and the computer will automatically restart to enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite.
Insert the system CD into the computer's optical drive, then press the computer's power button and click the F12 key continuously. Some laptop models are F12 + FN keys.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
You can follow the steps below to install the system disk system, buy a win7 CD, buy a win7 CD, and put the system CD into the optical drive. Set the startup mode to turn on the power, and then observe the prompts on the screen. Before starting the system, press "F2" to set the BIOS.
Power-Insert CD-ROM-Press DEL (desktop) or F2 key (most notebooks) or other keys to enter BIOS-Set the computer to start from CD-F10-Y-Enter, the computer automatically Enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite. After the boot installation is completed from the hard disk, restart.
First of all, after downloading the software, open it normally ("one-click reinstall system"). The program will detect the current system environment by default. After the detection is completed, click "Next".
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter.After entering the PE interface, select "Install System" after entering the PE interface.
1. Put the CD-ROM, buy a win7 CD-ROM, and put the system CD-ROM into the optical drive. Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.
2. Turn on the computer and press the Delete key when the computer self-checks, (Note: Some computers are Enter and F1 keys). After entering the CMOS interface, select the Startup option with the left and right keys on the keyboard. Select the first PrimaryBootSequence option and press the Enter key on the keyboard.
3. The first step, setOptical opening: The so-called optical opening means that the computer first reads the optical drive when starting up. In this way, if there is a CD with optical opening function in the optical drive, it can be read out before the hard disk starts (for example, when installing the system from the CD).
4. Pop up a dialog box to perform the decompression process of the CD image file, which needs to wait a few minutes. After decompression, we open the installation directory and find the [install system.exe] program.
5. To install from the disc, the BIOS should be set so that the system can start from the disc. The method is as follows: BIOS settings start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setting interface.
OKX Wallet-APP, download it now, new users will receive a novice gift pack.
CD-ROM installation system steps to enter BIOS settings to start up - insert CD-ROM - press DEL (desktop) or F2 key (most notebooks) or its It keys to enter the BIOS-set the computer to start from the CD-ROM-F10-Y-Enter, and the computer will automatically restart to enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite.
Insert the system CD into the computer's optical drive, then press the computer's power button and click the F12 key continuously. Some laptop models are F12 + FN keys.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
You can follow the steps below to install the system disk system, buy a win7 CD, buy a win7 CD, and put the system CD into the optical drive. Set the startup mode to turn on the power, and then observe the prompts on the screen. Before starting the system, press "F2" to set the BIOS.
Power-Insert CD-ROM-Press DEL (desktop) or F2 key (most notebooks) or other keys to enter BIOS-Set the computer to start from CD-F10-Y-Enter, the computer automatically Enter the system installation. After updating the driver and installing the system, just update the driver with the driver sprite. After the boot installation is completed from the hard disk, restart.
First of all, after downloading the software, open it normally ("one-click reinstall system"). The program will detect the current system environment by default. After the detection is completed, click "Next".
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter.After entering the PE interface, select "Install System" after entering the PE interface.
1. Put the CD-ROM, buy a win7 CD-ROM, and put the system CD-ROM into the optical drive. Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.
2. Turn on the computer and press the Delete key when the computer self-checks, (Note: Some computers are Enter and F1 keys). After entering the CMOS interface, select the Startup option with the left and right keys on the keyboard. Select the first PrimaryBootSequence option and press the Enter key on the keyboard.
3. The first step, setOptical opening: The so-called optical opening means that the computer first reads the optical drive when starting up. In this way, if there is a CD with optical opening function in the optical drive, it can be read out before the hard disk starts (for example, when installing the system from the CD).
4. Pop up a dialog box to perform the decompression process of the CD image file, which needs to wait a few minutes. After decompression, we open the installation directory and find the [install system.exe] program.
5. To install from the disc, the BIOS should be set so that the system can start from the disc. The method is as follows: BIOS settings start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setting interface.
459.39MB
Check232.52MB
Check669.55MB
Check529.89MB
Check891.27MB
Check168.14MB
Check691.41MB
Check936.34MB
Check124.65MB
Check766.11MB
Check975.88MB
Check855.44MB
Check995.73MB
Check725.12MB
Check364.69MB
Check862.82MB
Check985.47MB
Check719.22MB
Check256.26MB
Check843.93MB
Check186.22MB
Check297.33MB
Check786.23MB
Check269.87MB
Check782.37MB
Check682.32MB
Check995.73MB
Check926.61MB
Check633.14MB
Check563.71MB
Check471.49MB
Check194.56MB
Check583.27MB
Check332.28MB
Check124.74MB
Check653.69MB
CheckScan to install
OKX Wallet to discover more
Netizen comments More
1855 声情并茂网
2025-02-28 09:25 recommend
74 锋不可当网
2025-02-28 09:03 recommend
1587 低眉垂眼网
2025-02-28 08:30 recommend
494 如痴如梦网
2025-02-28 07:10 recommend
2053 中风狂走网
2025-02-28 07:08 recommend