Binance download

List of contents of this article:

• 1,Binance download How to put down the rear seat of the car
• 2 , CarThe rear seat is safer than the front seat
• 3, How to disassemble the rear seats of the car?

How to put down the rear seat of the car

There are three ways to put it down: 1. There is a button on the edge of the pillow behind the seat, and you can press it directly to put down the seat. There is a black belt at the junction between the cushion and the backrest. Pull it out. Lower the seat through the electric switch button. Can the rear row of the vehicle be dismantled?Do not dismantle it.

The rear seat of the car needs to be put down. Whether there is a switch under the headrests on both sides of the rear seat, and push the seat forward while pressing down to put the seat down. If it is a folding seat, open the trunk and pull the black strap back. Lift the seat up to put it down.

Put your hand under the seat cushion and lift the first half hard until the front buckle ring is pulled out. If it is operated by one person, it can be lifted from both sides first, which is easier and more convenient. The drop rate of the rear seat of the car is 1, 1/3. Press the rear seat down switch, pull the seat forward with your hand, and then put down the seat.

car rear row The seat is safer than the front row

The risk factor of the rear seat of the co-driver is 72. Professor Zhu Xishan, director of the Institute of Automobile Safety Technology of the College of Automobile of Tongji University, believes that if the front and rear passengers wear seat belts at the same time, the rear row is usually safer than the front row.

The co-driver's rear seat is the safest; this seat has the largest buffer area, and the space in the rear row is more spacious. If the car collides and rolls over, the middle position is less affected by the impact from both sides of the vehicle. This seat is subjected to the least centrifugal force, so it is the safest.

The rear seats of cars are safer than the front seats. People subconsciously form a law that the rear seats are safer than the front seats. Recently, an American safety insurance association has rejected this statement with research.

How to disassemble the rear seats of the car?

1. Disassembly method: x0dx0a on both sides of the head of the rear seat, close to the window, there will be a handle, pull the handle, the backrest of the rear seat can be turned forward, and most of the cushion part of the rear seat is directly squeezed to the rear of the car, and then lifted up to come out. .

2. The first thing that needs to be disassembled is the seat cushion, which is usually connected to the base. Use a tool to remove the screw fixing the seat cushion and remove it.Then gently remove the fixing point of the seat cushion and the base with your hand to make it detached.

3. The steps for removing the rear seat of the car are as follows. Find the wrench on both sides of the head of the rear seat, close to the window. Pull the wrench, the backrest of the rear seat can be turned forward, and the rear seat can be lifted up to remove the cushion. Just install it in the reverse order of disassembly and installation.

4. The first step is to find the screws connected and fixed to the rear seat of the car. These screws are in the bottom area of the rear seat of the car and can be removed with a No. 5 wrench or wrench sleeve. Then gently lift the rear seat of the car to remove the barbed wire under the chair. The second step is to remove the headrest of the rear seat of the car.