OKX app

List of the table of contents of this article:

• 1,OKX app Computer power-onWhat if I can't enter the system
• 2, What should I do if the computer can't enter the system normally?
• 3, The computer cannot enter the system-solution

What to do if the computer can't enter the system

1. Restart the computer. If you can enter the system normally, it means that the last time was just an occasional program or system operation error, and it doesn't matter. If you can't enter the system normally frequently, press F8 immediately after power-on to see if you can enter the safe mode or configure the correct mode for the last time. If so, exit after entering, and restart again, you should be able to enter the normal mode.

2. Network problems. If the computer cannot enter the system when it is turned on, it may be caused by network problems. You can directly connect to the broadband network cable test first. If it is a broadband problem, contact broadband customer service to solve it. If it is a problem with the router, you can try to disconnect the power of the router and plug it in, restore the factory settings, and you can use it from the new settings.

3. It is a common problem that the computer cannot enter the system when it is turned on, but many people don't know how to solve it. This article will introduce several solutions to help you solve this problem. Click the F8 key to enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.

4. When the computer cannot enter the system, we can take the following methods to solve it. The last correct configuration. After the computer starts up, you should press the F8 button before entering the operating system, then select the last correct configuration, and then press the Enter key.

5. If the computer cannot enter the system after turning on, you can try the following steps to solve the problem: Check the hardware connection: Make sure that all cables and cables are firmly connected.You can check the power cord, monitor cable, keyboard cable, etc.

What should I do if the computer can't enter the system normally?

Unplug the storage device and restart. If there are CDs, USB flash drives and other storage devices on the optical drive and USB interface, unplug them and restart them. Check hardIf the disk and boot device still cannot enter the system, enter the motherboard UEFI (BIOS) settings, check the following items in order and operate: see if the motherboard detects the hard disk correctly.

Restart the computer. If you can enter the system normally, it means that the last time was just an occasional program or system running error, and it doesn't matter.

This article will introduce the solution to the problem that the computer cannot start normally to help you solve the problem quickly. Check the power supply and power cord. First, check whether the power supply and power cord are normal to ensure that the computer can supply power normally.

Reinstalling the system can solve most of the problems of not being able to enter the system. If the above methods cannot solve the problem, you can send it directly to the specialty store for repair.

It is a common problem that the computer cannot enter the system when it is turned on, but many people don't know how to solve it.This article will introduce several solutions to help you solve this problem. Click the F8 key to enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.

The computer can't enter the system-solution

Restart the computer to solve the problem. If it still doesn't work, try other methods.

Unable to enter the system normally is generally caused by software or hardware failure. There are many and complex reasons. It may be system file damage, virus infection, too many background self-starting programs or multiple security software installations causing the system to die, or the graphics card or memory Current problem.

Check the hardware connection. If the motherboard LOGO cannot enter the system when it is turned on, you need to check whether the hardware connection is normal. Restart the computer. If the prompt message of white text appears on black on the screen, you can try to restart the computer and press F1 to skip non-fatal errors and start the computer directly.

Solution 5: Reinstall the system on the USB flash drive. If the above methods cannot be solved, we can only adopt the ultimate solution: the USB disk installation system can solve 99% of computer software failures. Use the USB disk boot disk making tool to make a USB disk boot disk, and then enter PE to install the system.