OKX Wallet app download for Android

List of contents of this article:

• 1, How to deal with the opening of the car bright strip
• 2、What to do if the car bright strip is open
• 3, How to deal with automobile bright strip oxidation
• 4, What is the trick to repair the car electroplating strip?

How to deal with the open glue of the car bright strip

1. If the glue is opened, you can buy some glue by yourself, or you can go to the 4s store to replace the new bright strip. When using the car at ordinary times, try not to park the car in a place exposed to the sun, which will accelerate the aging of these bright strips and will also cause the glue of the bright strips to open.

2. First, if the glue is open, you can buy glue by yourself to stick it, or buy double-sided glue to paste it. Second, if the decorative strip is open and there is obvious deformation, it is recommended to go to the 4s store or the nearest repair shop to replace the new car decorative strip.Third, for the maintenance of relevant car decoration.

3. If the bright strip is open, you can buy some glue to fix the bright strip again. You can also go to a professional car beauty agency to find a professional to fix it with glue. Many cars have bright strips. Most cars have bright strips on the side windows, and many cars also have bright strips on the front and rear bars.

4. If the glue mouth of the bright strip, you can buy some glue to re-fix the bright strip. You can also go to a professional vehicle beauty agency to find a professional glue to fix it. Most of the bright strips are fixed with glue. If the glue opens, fix it with new glue. It is normal to open the glue. If you often park your car outdoors, the glue will open after a while.

5. How to solve the problem of opening glue on the bright strip of the car window?One is to use yellow universal glue by yourself first, and treat the adhesive mouth first. The adhesive mouth should not be dirty, and the universal glue must be applied on both sides. Now that the weather is cold and dry in winter, you need to wait five or six minutes before pressing hard without letting go. It is best to bake it with a hair dryer, which can speed up the pasting.

What to do if the car bright strip is unglued

1. If the glue is opened, you can buy some glue by yourself, or you can go to the 4s store to replace the new bright strip. When using the car at ordinary times, try not to park the car in a place exposed to the sun, which will accelerate the aging of these bright strips and will also cause the glue of the bright strips to open.

2. First, if the glue is open, you can buy glue by yourself to stick it, or buy double-sided glue to paste it.Second, if the decorative strip is open and there is obvious deformation, it is recommended to go to the 4s store or the nearest repair shop to replace the new car decorative strip. Third, for the maintenance of relevant car decoration.

3. If the glue mouth of the bright strip, you can buy some glue to re-fix the bright strip. You can also go to a professional vehicle beauty agency to find a professional glue to fix it. Most of the bright strips are fixed with glue. If the glue opens, fix it with new glue. It is normal to open the glue. If you often park your car outdoors, the glue will open after a while.

4. The glue of the car shine strip is open. It is best to go to the 3M authorized store to change the glue, because the genuine 3M glue does not damage the paint, is sticky and not easy to fall off. Generally, high-quality car window decorative bright strips are made of stainless steel and bright silver. No matter how long it is used, it will not fade or rust.You must distinguish carefully when buying. Don't regard plastic as stainless steel.

How to deal with the oxidation of the car bright strip

1. The repair method of the oxidation of the car bright strip is toothpaste repair, toilet cleaning Cleaning artifact, WD-40 rust inhibitor, carburetor cleaning agent, rubber copper paste. Toothpaste repairToothpaste contains antioxidants and descaling granules, which can be polished in a wet towel, but you can't do anything in the face of stubborn rust.

2. The treatment method of car bright strip oxidation is as follows: wipe the oxidized part on the denim with car wax. Wipe the oxidation part with abrasive and wipe off the oxidation layer. Wipe it with toothpaste. Toothpaste contains antioxidants and descaling granules. Dip a wet towel in toothpaste and polish it. Wipe with toilet cleaner.

3. Whitening toothpaste can be used for oxidized chrome-plated decorative strips. Because whitening toothpaste contains antioxidants, it descales and grinds particles. Toothpaste is available in every family, which is convenient, fast and simple. Just stick it with a wet towel and wipe it until it is bright. Or wipe and polish with toilet cleaners, which contains dilute hydrochloric acid, which can dilute oxides.

4. There will be no oxidation layer on the surface, youWhat you see should be worn out, and the chromium layer has been worn off, revealing the nickel layer inside. After a long time, it is now dark brown, which looks like an oxide layer. You can throw it away. Don't wash it with acid, especially hydrochloric acid. Chromium will rot when it sees hydrochloric acid. If it's too ugly, you can change it.

5. If the car bright strip is corroded, it can be repaired with toothpaste. Toothpaste contains antioxidants and descaling grinding particles. You can polish it with a wet towel dipped in toothpaste; you can also use toilet cleaner, which contains dilute hydrochloric acid, which can dilute the oxide, and wipe it with a towel to wipe it off.

6. Hello car owner, the paint oxidation can be removed with iron powder and then sorted out with a polishing machine.

What is the trick to repair the car electroplating strip?

The repair methods for the oxidation of the car bright strip are toothpaste repair, bathroom cleaning artifact, WD-40 rust inhibitor, carburetor cleaning agent, and rubber copper paste. Toothpaste repair Toothpaste contains antioxidants and descaling granules, which can be polished in a wet towel, but in the face of stubborn rust, you can't do anything.

There are several ways to repair scratches on electroplated strips on cars: Toothpaste repair method Toothpaste contains antioxidants and descaling abrasives, which can be polished in a wet towel, but in the face of stubborn rust, you can't do anything. The toilet cleaning spirit repair method also contains dilute hydrochloric acid, which can react chemically with oxides.

To clean the bright surface layer, first take out a clean cotton cloth or soak the clean fine cotton cloth, dip it in some soapy water, and put the car outClean the stains on the watch, but be careful not to damage the car polish. In general, there will be some small dust. You can use a fine cotton cloth dipped in some water and gently wipe it off.

First, scrub and dry the place to be disassembled with water to prevent him from scratching the electroplating layer in the gravel. Second, apply toothpaste with a spun cloth or pure cotton cloth. Third, wipe the toothpaste with water and dry it. Fourth, buy tea and car wax. Try to use a toilet cleaner to clean the oil.