1,Backup containers. First of all, in order to back up the containers in Docker, we want to see the list of containers we want to back up. To achieve this goal, we need to run the docker ps command on the Linux machine where we are running the Docker engine and have created the container.
2, backup the boot partition of the Linux system ("/boot).
3. Docker will be installed under the /var/lib/docker/ directory by default under centOS. The capacity of this directory is not large, and it cannot be used if there are too many containers or mirrors created. The directory migration record is as follows (change to /home/docker): Stop the docker service.
2. When you use docker pull to pull down the image from the repository, or when you create a container from an image that does not yet exist locally, each layer will be pulled down separately and stored in the local storage area of Docker, which is usually /var/lib/ Docker/on the Linux host.
3. The operation steps are as follows: To install Docker, install the necessary dependencies on the Linux server. You can use the dockerimages command to obtain all the mirror images in the local repository, and select the appropriate one to download or update according to your needs.
1, restart the computer, enter the BIOS/boot window, set the mobile hard disk as the first boot device, and save the settings to exit the window. Restart the computer and test to start Linux from the mobile hard disk; after x0dx0a is successful, it is natural to restore the original hard disk connection of the host.
2. First, install the hard disk and partition it, and format it. It's better not to mount a new partition. The same goes for other subdivisions. In addition, the dd command will also copy uuid. After the migration is completed, the system in the new partition cannot be started yet.
3. My system is only installed in one partition, so I migrate directly in root mode: the migration is completed in about an hour.
4. The following will introduce how to transfer the system from the old hard disk to the new hard disk.Step 1: Backup data. Before replacing the hard disk, you need to back up the data on the old hard disk. Backup can be achieved by copying files to another hard disk or using backup software.
5. Specific steps: 1. Download ddcopy, make a win98 boot floppy disk and copy ddcopy to the floppy disk. You can also use a USB flash drive. 2. Connect the first hard disk, that is, the source disk with the Linux system installed, to the main data line connected to the main version, and the second hard disk, that is the target disk, is connected to the secondary data line connected to the main version.
1. Click the virtual machine and select to install VMware tools.Click to download directly. After the download is completed, just click to install. Just drag the files in the local machine directly into VMware. Select the virtual machine and click Settings. Enter the options page. Select the shared folder.
2. Click the virtual machine of your system, right-click setting, and then click option. There is a shared folder in it. The default is disabled. You can set a folder of your system to always enable, and this directory can be interoperable with linux in the future.
3. vmotion migration (hot migration): the open virtual machine is moved from one host or storage location to another host or storage location without interruption, also known as 'real-time migration'.Migration includes: any amount of system and application data running in memory, hardware device information.
Binance login-APP, download it now, new users will receive a novice gift pack.
1,Backup containers. First of all, in order to back up the containers in Docker, we want to see the list of containers we want to back up. To achieve this goal, we need to run the docker ps command on the Linux machine where we are running the Docker engine and have created the container.
2, backup the boot partition of the Linux system ("/boot).
3. Docker will be installed under the /var/lib/docker/ directory by default under centOS. The capacity of this directory is not large, and it cannot be used if there are too many containers or mirrors created. The directory migration record is as follows (change to /home/docker): Stop the docker service.
2. When you use docker pull to pull down the image from the repository, or when you create a container from an image that does not yet exist locally, each layer will be pulled down separately and stored in the local storage area of Docker, which is usually /var/lib/ Docker/on the Linux host.
3. The operation steps are as follows: To install Docker, install the necessary dependencies on the Linux server. You can use the dockerimages command to obtain all the mirror images in the local repository, and select the appropriate one to download or update according to your needs.
1, restart the computer, enter the BIOS/boot window, set the mobile hard disk as the first boot device, and save the settings to exit the window. Restart the computer and test to start Linux from the mobile hard disk; after x0dx0a is successful, it is natural to restore the original hard disk connection of the host.
2. First, install the hard disk and partition it, and format it. It's better not to mount a new partition. The same goes for other subdivisions. In addition, the dd command will also copy uuid. After the migration is completed, the system in the new partition cannot be started yet.
3. My system is only installed in one partition, so I migrate directly in root mode: the migration is completed in about an hour.
4. The following will introduce how to transfer the system from the old hard disk to the new hard disk.Step 1: Backup data. Before replacing the hard disk, you need to back up the data on the old hard disk. Backup can be achieved by copying files to another hard disk or using backup software.
5. Specific steps: 1. Download ddcopy, make a win98 boot floppy disk and copy ddcopy to the floppy disk. You can also use a USB flash drive. 2. Connect the first hard disk, that is, the source disk with the Linux system installed, to the main data line connected to the main version, and the second hard disk, that is the target disk, is connected to the secondary data line connected to the main version.
1. Click the virtual machine and select to install VMware tools.Click to download directly. After the download is completed, just click to install. Just drag the files in the local machine directly into VMware. Select the virtual machine and click Settings. Enter the options page. Select the shared folder.
2. Click the virtual machine of your system, right-click setting, and then click option. There is a shared folder in it. The default is disabled. You can set a folder of your system to always enable, and this directory can be interoperable with linux in the future.
3. vmotion migration (hot migration): the open virtual machine is moved from one host or storage location to another host or storage location without interruption, also known as 'real-time migration'.Migration includes: any amount of system and application data running in memory, hardware device information.
Binance app download Play Store
author: 2025-01-10 16:05498.44MB
Check493.33MB
Check285.92MB
Check646.72MB
Check411.34MB
Check923.33MB
Check889.13MB
Check635.61MB
Check895.42MB
Check537.94MB
Check753.37MB
Check167.99MB
Check746.18MB
Check786.36MB
Check918.52MB
Check659.32MB
Check269.86MB
Check238.38MB
Check714.91MB
Check472.72MB
Check715.89MB
Check942.45MB
Check494.69MB
Check128.99MB
Check648.25MB
Check746.77MB
Check431.92MB
Check654.61MB
Check111.97MB
Check841.17MB
Check311.93MB
Check669.18MB
Check378.51MB
Check857.68MB
Check751.82MB
Check232.56MB
CheckScan to install
Binance login to discover more
Netizen comments More
2892 话中带刺网
2025-01-10 18:13 recommend
1651 身后萧条网
2025-01-10 17:57 recommend
2611 全智全能网
2025-01-10 16:53 recommend
1922 清贫如洗网
2025-01-10 16:06 recommend
1290 阳关三迭网
2025-01-10 15:39 recommend