1. The computer reinstalls the system, but it has been stuck there. There are the following reasons and solutions.If the system image file is incomplete or damaged, it may not be downloaded completely when downloading, or the file is damaged when downloading, so that it will be stuck during installation. The solution is to re-download and download it to other system websites.
2. If there is no problem, it may be that the data cable of the hard disk is of poor quality or poor contact, which may lead to it. Note that first, replace the hard disk data cable and plug it into the motherboard, or change the two ends of the cable. If it still doesn't work, change the root line to test.
3. Generally, if the computer configuration is too low, it is possible to reinstall the system for the computer for 4 hours, so wait slowly. If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.
1. Turn off unnecessary programs and services: During the installation of the Win10 system, turning off other unnecessary programs and services can reduce the use of system resources, thus speeding up the installation. Check hardware devices: During the installation process, some hardware devices may be incompatible or driver problems, resulting in system installation jams.
2. Reset the function of this computer: reinstall the Windows 10 system automatically once, and you can choose whether to keep the existing software, applications and data. Going back to the previous version means that if you install win10 through the "upgrade" method, you can directly return to the system before the upgrade.
3. The solution is as follows; restart the computer and press and hold F8 to enter the latest correct configuration. Generally, under the latest system operation. You can enter the system normally. But after testing, it still can't enter the operating system.
If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.If you use a USB flash drive to install this situation, it is generally that there is a problem with the system made by the USB flash drive. Download another system and try it.
If there is a USB flash drive or card reader, dial the USB flash drive and card reader, then check the optical drive, and dial the data cable and power cable of the optical drive. Then it's the hard disk. You can unplug the hard disk first and start the computer to see the boot screen.
It may not be downloaded completely when downloading, or the file is damaged when downloading, so it will be stuck during installation. The solution is to re-download and download it to other system websites. There are bad channels on the installation disk. Whether it is installed with a USB flash drive, CD-ROM, or hard disk, there may be bad channels, causing the installation to be stuck.
The computer reinstall system is stuck. Try the following method: First, it is recommended to restart, and then continue the installation. Generally, it can be passed.If the first step fails, it is recommended to replace another version of the system disk for installation. If the above two steps fail, you need to troubleshoot according to the situation.
Binance US-APP, download it now, new users will receive a novice gift pack.
1. The computer reinstalls the system, but it has been stuck there. There are the following reasons and solutions.If the system image file is incomplete or damaged, it may not be downloaded completely when downloading, or the file is damaged when downloading, so that it will be stuck during installation. The solution is to re-download and download it to other system websites.
2. If there is no problem, it may be that the data cable of the hard disk is of poor quality or poor contact, which may lead to it. Note that first, replace the hard disk data cable and plug it into the motherboard, or change the two ends of the cable. If it still doesn't work, change the root line to test.
3. Generally, if the computer configuration is too low, it is possible to reinstall the system for the computer for 4 hours, so wait slowly. If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.
1. Turn off unnecessary programs and services: During the installation of the Win10 system, turning off other unnecessary programs and services can reduce the use of system resources, thus speeding up the installation. Check hardware devices: During the installation process, some hardware devices may be incompatible or driver problems, resulting in system installation jams.
2. Reset the function of this computer: reinstall the Windows 10 system automatically once, and you can choose whether to keep the existing software, applications and data. Going back to the previous version means that if you install win10 through the "upgrade" method, you can directly return to the system before the upgrade.
3. The solution is as follows; restart the computer and press and hold F8 to enter the latest correct configuration. Generally, under the latest system operation. You can enter the system normally. But after testing, it still can't enter the operating system.
If you use a CD-ROM to install the system, in this case, it is generally that the CD-ROM has been damaged. It is recommended to replace the system CD-ROM and reinstall it.If you use a USB flash drive to install this situation, it is generally that there is a problem with the system made by the USB flash drive. Download another system and try it.
If there is a USB flash drive or card reader, dial the USB flash drive and card reader, then check the optical drive, and dial the data cable and power cable of the optical drive. Then it's the hard disk. You can unplug the hard disk first and start the computer to see the boot screen.
It may not be downloaded completely when downloading, or the file is damaged when downloading, so it will be stuck during installation. The solution is to re-download and download it to other system websites. There are bad channels on the installation disk. Whether it is installed with a USB flash drive, CD-ROM, or hard disk, there may be bad channels, causing the installation to be stuck.
The computer reinstall system is stuck. Try the following method: First, it is recommended to restart, and then continue the installation. Generally, it can be passed.If the first step fails, it is recommended to replace another version of the system disk for installation. If the above two steps fail, you need to troubleshoot according to the situation.
878.35MB
Check225.19MB
Check574.83MB
Check157.45MB
Check398.28MB
Check543.93MB
Check464.98MB
Check535.11MB
Check678.22MB
Check977.43MB
Check483.27MB
Check164.28MB
Check684.81MB
Check373.59MB
Check849.61MB
Check968.62MB
Check194.66MB
Check928.56MB
Check581.88MB
Check497.91MB
Check679.24MB
Check317.37MB
Check295.33MB
Check155.85MB
Check414.74MB
Check855.82MB
Check277.26MB
Check137.61MB
Check639.35MB
Check298.58MB
Check391.15MB
Check992.28MB
Check741.68MB
Check825.74MB
Check568.22MB
Check581.62MB
CheckScan to install
Binance US to discover more
Netizen comments More
2658 天凝地闭网
2025-01-10 14:02 recommend
1204 啼笑皆非网
2025-01-10 13:46 recommend
1680 此起彼落网
2025-01-10 13:25 recommend
354 网开一面网
2025-01-10 13:16 recommend
382 逞己失众网
2025-01-10 12:44 recommend